Performance Tool 2-1/2-Inch Brake Rotor Hone

Performance Tool 2-1/2&quote; Brake Rotor Hone

• Use to score a cross hatch pattern on the surface of brake rotors
• Works on automotive and motorcycle brake rotors, and flywheels
• Gain lower harmonic vibration, and a quieter braking system
• 2-1/2 in. diameter 120 grit flexible ball stones

CAUTION: Low speeds only, 500 to 600 RPM. 1,000 RPM MAX.
1. Securely chuck the 1/4 shaft in a low RPM drill
2. Use light even pressure as you travel around the rotor or flywheel
3. After several times around the rotor stop and check that the glaze has been removed
4. Turn the rotor over and repeat the same process until you have the desired finish